Do not use ordinary cementitious mortar to scrub, use reputable abrasives on the market.īefore grouting, use a vacuum cleaner, clean the dirt from the tile slot and clean it on the tile floor. It is recommended to use a flexible cementitious scrubber mixture suitable for the application of Terrazzo tiles. Grouting will be applied after 2-3 days from tile installation date. Do not walk, or leave heavy objects on the floor for the first 24 hours after installation After tiling and adhesives have dried, clean the surface by wiping dirt with a towel, rinse with neutral detergent diluted with water, rinse thoroughly with clean water and dry the surface. In the process of installing, it is necessary to be very careful to keep the surface of the tiles clean, not to let the glue stick on the surface for long time. Keep a gap of at least 2mm between the tiles. Put tile in the area that were positioned before, use rubber hammer to close down at the determined height. Spread the adhesive on the back of tile and place the tile in the position where the adhesive was previously positioned. Step 4: Spread the adhesive on the back of tile Spread the 0.5-1cm thickness adhesive directly onto the substrate then use a serrated trowel to flatten. Follow the manufacturer's instructions to prepare the tile adhesive. Use a large trowel to spread the adhesive. Use a suitable fast setting and hydrated tile adhesive. Take a mark, use a wire to determine the correct installing position according to the drawing.
Note: The surface must be clean, dry before installation. Next, use the cement mortar to roll the foundation, flatten the thickness of 5-7cm, and then proceed to paving bricks after 24 hours In case of paving on the sandy ground: Flatten the sandy ground, then pour the concrete layer to make the ground flat. In case of direct installation on concrete: Using laser or water scale to check the ground, if it is not flat, it must be chiseled, patched, repaired to make flat ground. Step 1: Preparing the ground before installation Preparing proper surface and selecting adhesive, mortar (for tiles, and joint grout) suitable for interior terrazzo tile.
0 kommentar(er)
